JOURNAL PUBLICATIONS:

  1. S. Sattar, M. Didone, O. G. Kravchenko, S. G. Kravchenko, “Understanding the Effects of Stochastic Morphology on Compressive Behavior in Freeze-Casted Alumina Ceramic”, under review
  2. N. Saquib, E. Chaparro-Chavez, S. Sattar, D. Pedrazzoli, M. Zhang, S. G. Kravchenko, O. G. Kravchenko, “Effect of Local Meso-Structure on Strength Variability and Notch Strength Sensitivity in Woven Glass Fiber Nylon Composites, under review
  3. C. Jamora, C. M Sherin, S. Dong, B. Bhattacharjee, K. Kaipa, O. G. Kravchenko, “The Effect of Prepreg Laminate Thickness on Transverse Fiber Tow Deformation during Deposition of AFP Composites, under review
  4. D. Bhagatjia, T. Osunigaa, G. Fernandeza, O. G. Kravchenko, “Enhanced Mechanical Behavior of Additively Manufactured Polymer Composite Structures with Complex Shape Geometry via Hot Powder Bed Compaction”, under review
  5. Revolinsky, J. Barber, D. Pedrazzoli, O. G. Kravchenko, “Hot Pressing of 3D Printed Nylon Composites with Short and Long Carbon Fiber Reinforcement: Effect of Temperature and Pressure,” Polymers, 2025
  6. A. Larson, M. N. Saquib, J. Li, A. J. Favaloro, D. E. Sommer, B. R. Denos, R. B. Pipes, S. G. Kravchenko, O. G. Kravchenko, “The Use of Digital Thread for Reconstruction of Local Fiber Orientation in A Compression Molded Pin Bracket via Deep Learning,” Composites Part A: Applied Science and Manufacturing 187, 108491, 2024.
  7. Saquib, E. Chaparro-Chavez, C. Morris, K. Culebi, D. Pedrazzoli, M. Zhang, S. G. Kravchenko, O. G. Kravchenko, “Restoration of Strength in Polyamide Woven Glass Fiber Organosheets by Hot Pressing: Case Study of Impact and Compression after Impact,” vol. 16, Polymers, 2024.
  8. D. Bhagatji, O. G. Kravchenko, “Hot Powder Bed Compaction: A Rapid Fabrication Approach for Thermoplastic Composite Components,” Manufacturing Letters, 2024, vol. 40
  9. D. Bhagatji, C. Morris, Y. Sridhar, B. Bhattacharjee, K. Kaipa, O. G. Kravchenko, “Effect of Post-Cured through Thickness Reinforcement on Disbonding Behavior in Skin–Stringer Configuration,” Materials, 2024, 17 (14).
  10. Sattar, D. Pedrazzoli, M. Zhang, O. G. Kravchenko, “Influence of Flow-Induced Crystallization and Morphological Changes on the Mechanical Behavior of Long Discontinuous Glass Fiber Polyamide Composite,” Composites Part A, vo. 185, 2024
  11. Bhagatji, O. G. Kravchenko, S. Asundi, “Mechanics of Pure Bending and Eccentric Buckling in High Strain Composite Structures,” Materials, 2024.
  12. Larson, R. Hoque, V. Jamora, J. Li, S. G. Kravchenko, O. G. Kravchenko, “Prediction of Local Fiber Orientation State in Prepreg Platelet Molded Composites via Deep Convolutional Neural Network,” Engineering Applications of Artificial Intelligence, 2024
  13. Barber, H. Eisazadeh, O. G. Kravchenko, “Investigation of Iso-Static Compaction on Fracture Toughness of 3D Printed Nylon Carbon Fiber Composites,” Progress in Additive Manufacturing.
  14. Saquib, S. Sattar, R. Larson, J. Li, S. G. Kravchenko, O. G. Kravchenko, “Experimental Validation of Microstructure Reconstruction in Long Discontinuous Fiber Molded Composite Using Deep Learning,” Applied Mechanics, 91(4): 041004, 2024
  15. C. Jamora, V. Rauch, S. G. Kravchenko, O. G. Kravchenko, “Effect of resin bleed out on compaction behavior of the fiber tow gap region during automated fiber placement manufacturing”, Polymers, 2024
  16. D. Mulqueen, S. Sattar, O. G. Kravchenko, “Plant Based Graphene for Enhancing Hot Temperature Mechanical Properties in Thermosetting Carbon Fiber Laminates”, Composites Part B, Feb. 2023
  17. Larson, V. C. Jamora, S. G. Kravchenko, O. G. Kravchenko, “The Effect of Core Material on the Mechanical Behavior of Compression Molded Glass Fiber Thermosetting Hybrid Composites,” Journal of Reinforced Plastics and Composites, Dec. 2022
  18. Sattar, D. Pedrozzoli, M. Zhang, S. G. Kravchenko, O. G. Kravchenko “Notched Tensile Strength of Long Discontinuous Glass Fiber Reinforced Nylon Composite,” Composites Part A: Applied Science and Manufacturing 163, 107217
  19. Sattar, B. Laredo, S. G. Kravchenko, O. G. Kravchenko, “Effect of Platelet Length and Stochastic Morphology on Flexural Behavior of Prepreg Platelet Molded Composites,” Polymer Composites, 2023
  20. D. Mulqueen, S. Sattar, T. Le, O. G. Kravchenko, “Spray Deposition of Sustainable Plant Based Graphene in Thermosetting Carbon Fiber Laminates for Mechanical, Thermal and Electrical Properties, Polymer Composites, Dec. 2022
  21. Larson, F. Leone, A. Bergan, O. G. Kravchenko, “Influence of Stochastic Adhesive Porosity and Material Variability on Failure Behavior of Adhesively Bonded Composite Sandwich Joints,” Composites Structures, Dec. 2022
  22. Jain, S. Sattar, D. Malqueen, D. Pedrazzoli, S.G. Kravchenko, O. G. Kravchenko, “Role of Annealing and Isostatic Compaction on Mechanical Properties of 3D Printed Short Glass Fiber Nylon Composites,” Additive Manufacturing, Jan. 2022
  23. Sattar, B. Laredo, D. Pedrazzoli, M. Zhang, O. G. Kravchenko, “Mechanical Behavior of Discontinuous Glass Fiber Nylon Produced by In-Situ Polymerization,” Composites Part A, March 2022
  24. Volle, W. Jackson, S. G. Kravchenko, O. G. Kravchenko, “Compression After Impact of Platelet Based Compression Molded Composites,” Composites Part A, 2021
  25. Trochez, D. Ghosh, C. Wu, V. C. Jamora, O. G. Kravchenko, “High Strain Rate Mechanical Characterization of Composites Produced by Automated Fiber Placement with Layup Defects,” published in Journal of Composite Materials, 2021
  26. S. Sattar, R. Jujjavarapu, S. G Kravchenko, O. G Kravchenko, Micromechanical modeling of compressive behavior in freeze‐casted ceramic,” Journal of the American Ceramic Society, 06/22/2020
  27. V. C. Jamora, K. C. Wu, O. G. Kravchenko, “Residual Deformation Analysis in Composite Shell Structures Manufactured using Automated Fiber Placement,” Composite Structures, 05/21/2020
  28. M. Suresh, A. Sanders, P. Prajapati, K. Kaipa, O. G. Kravchenko, “Composite Sandwich Repair using Through-Thickness Reinforcement with Robotic Hand Micro-Drilling,” Composite Structures, 05/17/2020
  29. A. Patel, S. Mekala, O. G. Kravchenko, T. Yilmaz, D. Yuan, L. Yue, R. A. Gross, I. Manas-Zloczower, “Design and formulation of a completely biobased epoxy structural adhesive” ACS Sustainable Chemistry & Engineering, 9/18/2019
  30. O. G. Kravchenko, V. S. Bonab, I. Manas-Zloczower, “Spray Assisted Microwave Welding of Thermoplastics,” Polymer Engineering and Science, 2019 
  31. O. G. Kravchenko, D. Pedrazzoli, V. S. Bonab, I. Manas-Zloczower, “Conductive Interlaminar Interfaces for Structural Health Monitoring in Composite Laminates under Fatigue Loading,” Materials and Design, Vol. 160, pp. 1217-1225 
  32. O. G. Kravchenko, G. Gedler, D. L. Feke, I. Manas-Zloczower, “Modeling Compressive Behavior of Open-Cell Polymerized High Internal Phase Emulsions: Effects of Density and Morphology,” Soft Matter, Vol. 14, pp. 1637-1646, 2018
  33. A. Patel, O. G. Kravchenko, I. Manas-Zloczower, “Effect of Curing Rate on the Microstructure and Macroscopic Properties of Epoxy Fiberglass Composites,” Polymers Vol. 10, Issue 2, p. 125
  34. X. Qian, O. G. Kravchenko, D. Pedrazzoli, I. Manas-Zloczower, “Effect of Polycarbonate Film Surface Finish and Plasma Treatment on Mode I and II Fracture Toughness of Interleaved Composite Laminates,” Composites Part A, Vol. 105, pp. 138-149
  35. O. G. Kravchenko, D. Pedrazzoli, D. Kovtun, X. Qian, I. Manas-Zloczower, “Incorporation of Plasma Functionalized Carbon Nanostructures in Composite Laminates for Interlaminar Reinforcement and Delamination Crack Monitoring,” Journal of Physics and Chemistry of Solids, Vol. 112, pp. 163-170
  36. O. G. Kravchenko, R. Misiego, X. Qian, S. G. Kravchenko, R. B. Pipes, I. Manas-Zloczower, “Role of Hierarchical Morphology of Helical Carbon Nanotube Bundles on Thermal Expansion of Polymer Nanocomposites,”  Journal of Materials Research
  37. O. G. Kravchenko, S. G. Kravchenko, R. B. Pipes, “Cure History Dependence of Residual Deformation in Thermosetting Composite Laminates”, Composites Part A: Applied Science and Manufacturing, Vol. 99, pp. 186-197, Aug. 2017.
  38. O. G. Kravchenko, S. G. Kravchenko, C. T. Sun, “Thickness Dependence of Mode I Interlaminar Fracture Toughness in Carbon Fiber Thermosetting Composite,” Composite Structures, Vol. 160, pp. 538-546, Jan. 2017.
  39. O. G. Kravchenko, R. Misiego, S. G. Kravchenko, R. B. Pipes, I. Manas-Zloczower, “Modeling of Hierarchical Morphology of Carbon Nanotube Bundles in Polymer Composites,” Macromolecular Theory and Simulations, Oct. 2016.
  40. Y. Xie, O. G. Kravchenko, R. B. Pipes, M. Koslowski, “Phase Field Modeling of Damage in Glassy Polymers,” Journal of the Mechanics and Physics of Solids, Vol. 93, pp. 182-197, Aug 2016.
  41. O. G. Kravchenko, S. G. Kravchenko, R. B. Pipes, “Chemical and Thermal Shrinkage in a Thermosetting Prepreg”, Composites Part A: Applied Science and Manufacturing, Vol. 80, pp. 72-81, Jan 2016.
  42. O. G. Kravchenko, S. G. Kravchenko, A. Casares R. B. Pipes, “Digital Image Correlation Measurement of Resin Chemical and Thermal Shrinkage after Gelation,” Journal of Materials Science, Vol. 50, pp. 5244-5252, Aug 2015.
  43. S. G. Kravchenko, O. G. Kravchenko, L. A. Carlsson, R. B. Pipes, “Influence of Through- Thickness Reinforcement Aspect Ratio on Mode I Delamination Fracture Resistance,” Composite Structures, Vol. 125, pp. 13-22, 2015.
  44. O. G. Kravchenko, C. Li, A. Strachan, S. G. Kravchenko, R. B. Pipes, “Prediction of the Chemical and Thermal Shrinkage in a Thermoset Polymer,” Composites Part A: Applied Science and Manufacturing, Vol. 66, pp. 35-43, Nov. 2014.
  45. S. G. Kravchenko, O. G. Kravchenko, C. T. Sun, “Two-Parameter Fracture Mechanics Model for Fatigue Crack Propagation in Brittle Materials,” Journal of Engineering Fracture Mechanics, Vol. 119, pp. 132-147, Mar 2014.
  46. S. Kravchenko, O. Kravchenko, M. Wortmann, M. Pietrek, P. Horst, R. B. Pipes, “Composite Toughness Enhancement with Interlaminar Reinforcement,” Composites Part A: Applied Science and Manuf., Vol. 54, pp. 98-106, Nov. 2013.
  47. J. Goodsell, N. J. Pagano, O. Kravchenko, R. B. Pipes, “Interlaminar Stresses in Composite Laminates Subjected to Anticlastic Bending Deformation,” Journal of Applied Mechanics, 1, pp. 426, 2012.

Link to publications

CONFERENCES AND INVITED PRESENTATIONS

  1. W. Mulqueen, S. Xiao, O. G. Kravchenko, “MULTIFUNCTIONAL PROPERTIES OF COMPOSITES WITH CONDUCTIVE COATINGS USING RENEWABLE PLANT BASED GRAPHENE FROM BIOMASS WASTE SOURCES,” SAMPE, Indianapolis, 2025
  2. R. Sinkler, A. Ravangard, S. Zeid, Barron Cohen, T. Garstka, O. G. Kravchenko, “FRAMEWORK FOR PREDICTING RESIDUAL STRESS IN FILAMENT WOUND CFRP LAMINATE DURING CURE,” SAMPE, Indianapolis, 2025
  3. Ravangard, O. G. Kravchenko, “REDUCING OUT-OF-PLANE FIBER WAVINESS IN AFP PREFORMS BY SELECTIVE PLACING OF THERMOPLASTIC VEILS,” SAMPE, Indianapolis, 2025
  4. Mulqueen, A. Sinkler, O. G. Kravchenko, “Multifunctional graphene from renewable plant based sources and its impact on high temperature composite properties and flame resistance,” High TEMPE Conference, Ashville, NC, 2025
  5. N. Saquib, R. Larson, J. Li, S. G. Kravchenko, O. G. Kravchenko, “Reconstruction of Internal Morphology in Molded Platelet Composite using Residual Stresses and Deep Convolutional Neural Network,” paper/presentation, CAMX, Long Beach, Sept. 2024.
  6. D. Bhagatji, T. Osuniga, G. Fernandez, O. G. Kravchenko, “Investigation of Hot Powder Bed Compaction for Enhanced Fusion Bonding in Additive Manufacturing of Composite Component,” paper/presentation, CAMX, Long Beach, Sept. 2024.
  7. N. Saquib, R. Larson, J. Li, S. G. Kravchenko, O. G. Kravchenko, Residual Stress and Artificial Intelligence Enabled Morphology Reconstruction of a Molded Composite, SPE ACCE, Novi, MI, Sept. 2024.
  8. D. Bhagatji, T. Osuniga, G. Fernandez, O. G. Kravchenko, “Flexible Fusion Process via Hot Powder Bed Compaction: Case for Additive Manufacturing of Topology Optimized Structures, SAMPE, Long Beach, CA, May 2024
  9. Mulqueen, O. G. Kravchenko, Producing Multifunctional PA6/Organosheet Composites with Sustainable Plant Based Graphene Coatings, SAMPE, Long Beach, CA, May 2024
  10. D. Bhagatji, O. G. Kravchenko, Hot Powder Bed Compaction: A Rapid Fabrication Approach for Thermoplastic Composite Prepreg Components, paper/presentation, The Sixth International Symposium on Automated Composites Manufacturing, Columbia, SC, March 2024.
  11. Morris, J. Bhagatji, K. Kaipa, O. G. Kravchenko, The Effect of Through Thickness Reinforcement on the Disbonding Behavior in Skin-Stringer Configuration, presentation, The Sixth International Symposium on Automated Composites Manufacturing, Columbia, SC, March 2024.
  12. Ravangard, V. C. Jamora, J. D. Bhagatji, O. G. Kravchenko, “Mechanics of Resin Rich Regions Formation in AFP Preform with Staggered Fiber Tow Gaps,” presentation, The Sixth International Symposium on Automated Composites Manufacturing, Columbia, SC, March 2024.
  13. Sattar, O. G. Kravchenko, “Effects of Stochastic Morphology on Compressive Behavior of Freeze-Casted Alumina Ceramic,” presentation, ICACC Daytona Beach, 2024
  14. Saquib, “Restoration of Strength in Polyamide Woven Glass Fiber Organsheet After Impact Using Hot Pressing Repair,” conference paper/presentation Automotive Composites Conference and Exhibition, Novi 2023
  15. Jamora, A. Rangavard, O. G. Kravchenko, “Significance of Staggered AFP Tow Gaps on Complex Cured Morphology and Failure,” conference paper/presentation at American Society for Composites, Sept. 2023
  16. Larson, J. Li, S. G. Kravchenko, O. G. Kravchenko, Spatial Through Thickness Fiber Orientation Prediction in a Platelet Molded Composite using Deep Learning,” conference paper/presentation at American Society for Composites, Sept. 2023.
  17. Larson, S. G. Kravchenko, J. Li, O. G. Kravchenko, “Deep Learning and Thermal Strain Vision for Reconstruction of Fiber Orientation Distribution in Geometrically Complex Molded Composite Parts,” SAMPE, Seattle, 2023
  18. C. Jamora, C. Sherin, S. Dong, B. Bodhisatwa, K. Kaipa, O. G. Kravchenko, “Fiber Tow Spreading during AFP Manufacturing,” paper/presentation at SAMPE, Seattle, April 2023.
  19. Sattar, M. Zhang, D. Pedrazzoli, O. G. Kravchenko, Effect of Flow-Induced Crystallization and Morphological Changes on the Mechanical Behavior of Long Discontinuous Glass Fiber Polyamide Composite, paper/presentation, SAMPE, Seattle, April 2023.
  20. C. Jamora, O. G. Kravchenko, “Process Modeling of a Quasi-isotropic Laminate with Multiple Embedded Staggered Tow Gaps”, AIAA SciTech, Jan. 2023.
  21. Sherin, S. Dong, V. Jamora, B. Bhattacharjee, K. Kaipa, O. G. Kravchenko, “Effect of Surface Compliance on Tow Widening as a Function of Compaction Force and Temperature During Automated Fiber Placement,” AIAA SciTech, Jan. 2023.
  22. Bhagatji, O. G. Kravchenko, S. Asundi, “Large Deformation Bending of Ultralight Deployable Structure For Nano- Micro-Class Satellites,” AIAA SciTech, Jan. 2023
  23. G. Kravchenko, S. Sattar, D. Pedrazzoli, M. Zhang, “Hole Size Sensitivity in Long Discontinuous Glass Fiber Reinforced Nylon Organosheets,” SPE ACCE 2022, Novi, Michigan
  24. G. Kravchenko, S. Sattar, “Improving Mechanical Properties of 3D Printed Short Glass Fiber Nylon Composites by Compaction,” SPE ACCE 2022, Novi, Michigan
  25. Saquib, S. Sattar, R. Larson, J. Li, S. G. Kravchenko, O. G. Kravchenko, “Reconstruction of Fiber Orientation Distribution in Molded Composites using Deep Learning,” SPE ACCE 2022, Novi, Michigan
  26. Jamora, B. Laredo, O. G. Kravchenko, “Modeling of Wrinkle Formation in Non-Crimp Dry Fabric during Preform Compaction,” SPE ACCE, 2022
  27. Dillulio, O. G. Kravchenko, K. Cigularov, “Enabling Resilient Educational Support Network during COVID-19 Pandemic for Undergraduate and Second Career Seeking Students,” poster and paper at ASEE Conference, Minnesota, 2022
  28. Sattar, O. G. Kravchenko, “Mechanics of Open Hole Failure in Nylon Based Discontinuous Glass Fiber Organosheets,” presentation at Johns Manville Corp., Denver, 2022
  29. Sattar, D. Pedrazzoli, M. Zhang, O. G. Kravchenko, “Notched Tensile Strength of Long Discontinuous Glass Fiber Reinforced Nylon Composite,” Society for the Advancement of Material and Process Engineering , May 23-26 2022
  30. Mulqueen, O. G. Kravchenko, “Fracture Toughness of Carbon Fiber Epoxy at Elevated Temperatures with Interlaminar Graphene,” Society for the Advancement of Material and Process Engineering, May 23-26, 2022
  31. C. Jamora, V. Rauch, S. G. Kravchenko, O. G. Kravchenko, “Mechanics of Fiber Tow Compaction for Predicting Defect Morphology in AFP composites,” paper/presentation at AIAA SciTech Forum and Exhibition, San Diego, Jan. 3-7, 2022
  32. Larson, R. Hoque, V. C. Jamora, J. Li, S. G. Kravchenko, O. G. Kravchenko, “Hyperparameters Effect in Deep Convolutional Neural Network Model on Prediction of Fiber Orientation Distribution in Prepreg Platelet Molded Composites,” paper/poster/presentation at AIAA SciTech Forum and Exhibition, San Diego, California, Jan. 3-7 2022
  33. Mulqueen, O. G. Kravchenko, “Improving Thermal and Electrical Conductivity of Thermosetting Composites with Plant-Based Graphene,” paper/poster/presentation at SPE ACCE, Novi, Michigan, Nov. 2-5 2021
  34. Larson, F. Leone, A. Bergan, O. G. Kravchenko, “Numerical Study of Unavoidable Material Variability Effects on Damage Development Within Composite Adhesively Bonded Joints,” abstract/poster/presentation at SPE ACCE, Novi, Michigan, Nov. 2-5 2021
  35. Larson, J. Li, S. G. Kravchenko, O. G. Kravchenko, “Machine Learning Approach for Prediction of Fiber Orientation Distribution in Molded Composites,” abstract/presentation at SPE ACCE, Novi, Michigan, Nov. 2-5 2021
  36. Sattar, B. B. Laredo, R. Larson, S. G. Kravchenko, O. G. Kravchenko, “Effect of Platelet Length and Stochastic Morphology on Flexural Behavior of Prepreg Platelet Molded Composites”, paper/presentation at SPE ACCE, Novi, Michigan, Nov. 2-5 2021
  37. Larson, J. Li, S. G. Kravchenko, O. G. Kravchenko, “Machine Learning Approach for Prediction of Fiber Orientation Distribution in Molded Composites,”2nd Workshop on Knowledge Guided Machine Learning, University of Minnesota, Aug. 18-20 2021
  38. Sattar, B. Laredo, D. Pedrazzoli, M. Zhang, O. G. Kravchenko, “Understanding Size Effects on Flexural Properties in Discontinuous Fiber Reinforced Nylon Composites,” Conference proceedings at Composites and Advanced Materials Expo, Society for the Advancement of Material and Process Engineering (SAMPE), Sept. 2020
  39. Larson, A. Bergan, F. Leone, O. G. Kravchenko, “Understanding Variability in Mechanical Behavior of Adhesively Bonded Joints due to Stochastic Material Damage,” Paper/presentation at 35th American Society for Composites, Sept. 2020
  40. Sattar, B. Laredo, D. Pedrazzoli, M. Zhang, O. G. Kravchenko, “Understanding Size Effects on Flexural Properties in Discontinuous Fiber Reinforced Nylon Composites,” Poster at Automotive Composites Conference and Exhibition, Society of Plastics Engineers, Novi, MI, Sept. 2020
  41. C. Jamora, C. Wu, O. G. Kravchenko, “Residual Deformation Analysis in Composite Shell Structures Manufactured using Automated Fiber Placement,” Presentation/poster at Automotive Composites Conference and Exhibition, Society of Plastics Engineers, Novi, MI, Sept. 2019
  42. Larson, A. Newman, S. G. Kravchenko, O. G. Kravchenko, “The Effect of Print Path on Damage Initiation and Propagation in Additively Manufactured Open Hole Coupons,” Paper/presentation/poster at Automotive Composites Conference and Exhibition, Society of Plastics Engineers, Novi, MI, Sept. 2020
  43. Wang, S. Dong, P. Prajapati, O. G. Kravchenko, K. Kaipa, “Combining Force-Controlled Adaptive Feedrate and Human-Robot Collaborative Strategies to Handle Non-repetitive Micro-drilling Tasks,“ 2020 IEEE 16th International Conference on Automation Science and Engineering (CASE), Aug. 2020.
  44. M. Raibagi, P. S. J. Monteiro, R. K. Pallam, A. Murthy, A. Gadag, S. Asundi, O. G. Kravchenko, “Glue-infused Rotating Nanofibers Net (GRoNNet) for Capturing Space Debris – A Novel Debris Capturing System,” 34th Annual AIAA/USU Small Satellite Conference, July 2020
  45. G. Kravchenko, P. Dullilio, K. Cigularov, “Understanding the Demands and Resources for Academic Success of Undergraduate Second Career, Traditional, and Graduate Engineering Students,” Paper/presentation at American Society of Engineering Education, Montreal, June 21-24, 2020
  46. G. Kravchenko, T. Vandecar-Burdin, P. Dullilio, K. Cigularov, “Opportunities in Manufacturing of Advanced Materials for Second Career Seeking Students,” Paper/presentation at American Society of Engineering Education, Montreal, June 21-24, 2020
  47. G. Kravchenko, S. Sattar, S. G. Kravchenko, “Understanding the Stochastic Variability in Ice-Templated Ceramic through Micro-Mechanical Modeling,” Invited presentation/abstract at American Ceramic Society Meeting, Daytona Beach, Feb. 2020
  48. Sattar, S. G. Kravchenko, O. G. Kravchenko, “Micromechanical Modeling of Ice-Templated Porous Ceramics using Smeared Cracking Approach,” Abstract/presentation at American Ceramic Society Meeting, Daytona Beach, Feb. 2020
  49. Suresh, A. Sanders, P. Prajapati, K. Kaipa, O. G. Kravchenko, “Composite Sandwich Repair using Through-Thickness Reinforcement with Robotic Hand Microdrilling,” paper/poster/presentation at Automotive Composites Conference and Exhibition, Society of Plastics Engineers, Novi, MI, Sept. 2019
  50. G. Kravchenko, “Role of Thermo-Chemical Shrinkage on Dimensional Stability of Composites,” Invited presentation at Future Generation Symposium on Composite Materials (Shirahama, Japan) and Kyoto University, Aug. 2019
  51. G. Kravchenko; S. Sattat, D. Ghosh, “Computational Micromechanical Modeling of Compressive Behavior for Freeze-Casted Porous Ceramic,” Invited presentation/abstract submitted to American Ceramic Society Meeting, Daytona Beach, Feb. 2019
  52. G. Kravchenko, “Supporting Composite Materials Design and Manufacturing using Process Modeling and Structure-Property Relationships,” Invited presentation at Johns Manville Inc., Denver, CO, Jan. 2019
  53. Larson, S. Way, G. D’Antonio, V. C. Jamora, J. D’Antonio, J. Harris, K. Allard, O. G. Kravchenko, “Mechanical Behavior of Compression Molded Hybrid Composites,” paper/presentation at Automotive Composites Conference and Exhibition, Society of Plastics Engineers, Novi, MI, Sept. 2018
  54. Valdivia, B. Beltran, A. Bain, K. Lentz, R. Bell, R. McFarland, K. Bobie, M. Story, P. Rafighi, J. Pauley, H. Moyopo, O.G. Kravchenko, “Application of Hybrid Compression Molded Composites for Design and Manufacturing of Rear Suspension Rocker Automotive Component,” poster at Automotive Composites Conference and Exhibition, Society of Plastics Engineers, Novi, MI, Sept. 2018
  55. G. Kravchenko, “Transforming Composite Materials Design through Process Modeling and Advanced Manufacturing,” Invited presentation, STIHL Inc., Sept. 2018
  56. G. Kravchenko, “Supporting Composite Materials Design and Manufacturing using Process Modeling and Structure-Property Relationships,” Invited presentation, Hampton Roads Advanced Manufacturing Summit, August 2018
  57. G. Kravchenko, “Transforming Composite Materials Design through Process Modeling and Advanced Manufacturing,” Invited presentation, NASA Langley Research Center, July. 2018
  58. Qian, O. G. Kravchenko, D. Pedrazzoli, I. Manas-Zloczower, “Effect of Polycarbonate Film Surface Finish and Plasma Treatment on Mode I and II Fracture Toughness of Interleaved Composites,” paper/presentation at 32st American Society for Composites (ASC) Technical Conference, West Lafayette, Indiana, 2017
  59. G. Kravchenko, S. G. Kravchenko, R. B. Pipes, “Analysis of Cure Dependent Residual Deformation in Thermosetting Composites,” paper/presentation at American Society for Composites Annual Technical Conference, West Lafayette, IN, Oct. 2017
  60. Kravchenko, G. Gedler, D. Feke, I. Manas-Zloczower, “Micromechanical Modeling of the Compressive Response of Poly(HIPE),” abstract/presentation American Chemical Society National Meeting, Washington D. C., Aug. 2017
  61. Patel, O. Kravchenko, L. Yue, D. Yuan, R. Gross, I. Manas-Zloczower, “Toughened Biobased Epoxy Nanocomposites as Structural Adhesive,” abstract/presentation at American Chemical Society National Meeting, Washington D. C., Aug. 2017
  62. G. Kravchenko, D. Pedrazzoli, I. Manas-Zloczower, “Fatigue and Structural Health Monitoring of Delamination in Composite Materials,” Keynote presentation at Polymer Processing Society Conference, Dresden, Germany, June, 2017
  63. G. Kravchenko, D. Pedrazzoli, D. Kovtun, I. Manas-Zloczower, “Multifunctional Ply Interphases in Hierarchical Composite Laminates,” paper/presentation at Annual Technical Conference of Society of Plastics Engineers, Anaheim, CA, May, 2017
  64. G. Kravchenko, S. G. Kravchenko, C. T. Sun, “Apparent Fracture Toughness in Brittle Materials under Static and Fatigue Loading,” abstract and presentation for 41th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, FL, Jan 2017
  65. G. Kravchenko, S. G. Kravchenko, R. B. Pipes, “Chemical and Thermal Induced Shrinkages in Thermosetting Composite,” Invited presentation, National Institute for Aviation Research, Wichita, KS, Sept. 2016
  66. G. Kravchenko, R. Misiego, S. G. Kravchenko, R. B. Pipes, I. Manas-Zloczower, “Relation between morphology and thermo-elastic properties of carbon nanotube polymer hybrid composite,” paper/presentation at 31st American Society for Composites (ASC) Technical Conference, Williamsburg, Virginia, 2016
  67. G. Kravchenko, R. B. Pipes, “Cure History Dependent Residual Deformation in Thermosetting Composite Laminates,” Invited presentation at 12h International Conference on Durability of Composite Systems, Arlington, TX, June 2016
  68. Pedrazzoli, O. G. Kravchenko, I. Manas-Zloczower, “Interlaminar Fracture Toughness of Woven Glass Fiber-Epoxy Laminates with Carbon Nanotube Buckypaper,” paper/presentation at Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 2015
  69. G. Kravchenko, R. B. Pipes, “Prediction of Residual Deformation in Thermosetting Composites Due to Cure,” presentation for 40th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, FL, Jan 2016
  70. G. Kravchenko, S. G. Kravchenko, R. B. Pipes, “Residual Cure Stress Buildup in Thermosetting Composite: Modeling and Experimental Validation,” paper/presentation for 30th ASC Technical Conference, Michigan, MI, Sep. 2015
  71. G. Kravchenko, O. G. Kravchenko, R. B. Pipes, “A Novel Through Thickness Reinforcement Method of Cured Composites,” paper/presentation for 30th ASC Technical Conference, Michigan, MI, Sep. 2015
  72. G. Kravchenko, Y. Xie, M. Koslowski, “Phase Field Modeling of Crack Propagation in Double Cantilever Beam under Mode I,” Society of Engineering Science (SES) Annual Technical Meeting, West Lafayette, IN, Oct 2014
  73. G. Kravchenko, R. B. Pipes, “Chemical and Thermal Shrinkage in Thermosetting Composite,” Invited presentation, NASA John H. Glenn Research Center, Cleveland, OH, March 2015
  74. G. Kravchenko, S. G. Kravchenko, R. B. Pipes, “Analysis of Bi-material Strip Specimen for Predicting Cure Induced Shrinkages,” paper/presentation for 29th ASC Technical Conference, San-Diego, CA, Sep 2014
  75. G. Kravchenko, R. B. Pipes, “Prediction of Chemical and Thermal Shrinkage in Thermoset Polymer,” Invited presentation, Evonik Industries, Lafayette, IN, Apr 2014
  76. G. Kravchenko, R. B. Pipes, “Design of Optimum Cure Cycle for Polymeric Composites,” Invited presentation, Rolls-Royce Global Research Team, Indianapolis, IN, Jul 2013
  77. O. Kravchenko, C. T. Sun, “Effect of Specimen Dimensions on Interlaminar Fracture Toughness of Composites,” paper/presentation for 27th ASC Technical Conference, Arlington, TX, Sep 2012